Tag Archives: hydraulic test

China supplier Computer Control Water Hydraulic Test Bench for Plastic Pipe, Fire Pipe, Extinguisher with Best Sales

Product Description

Product Description

Hydraulic high pressure test machine -Computer control type with armored glass protection cabinet.
Applicable for :hose/tube/pipe/valve/sensor/cylinder/gauge

Test medium: water/hydraulic oil
Test pressure range:0-4400 bar
Drive source: clean compressed air
Driven compressed air pressure: 3-8bar (recommended driving pressure ≤8bar)

Our company has rich experience in the hose ,tube, pipe pressure test field, we can provide reliable performance hydraulic pressure test equipment, leakage test equipment, pressure pulse test equipment, It is mainly used for testing the pressure performance of automobile brake pipe, power train pipe and other pressure parts.

High pressure test bench is composed of Air driven liquid booster pump and control valve, pressure gauges, gas inlet filter, air regulating valve, pipelines, cabinet(toughened glass, professional protective screen, to ensure maximum safety), high pressure regulator, high pressure relief valve, pressure release valve etc.

TEREK Burst Pressure Test Benches is Special pressure testing equipment,   Provide pressure and bursting testing for various hydraulic hoses, valves, vessels, tubes and other hydraulic products. They are use air driven hydraulic pump for liquid pressurization. Test pressure is up to maximally 320Mpa. Test medium can be water and hydraulic oil.

Technical parameters:

Type

Pressure ratio

Max outlet pressure  (bar)

Max flow   (L/min)

Connection size(inch)Drive

Connection size(inch)   Inlet

Connection size(inch)   Outlet

THT-LDD-16

16:1

128

19.73

G1/2

NPT 1/2

NPT 1/2

THT-LDD-28

28:1

224

11.3

G1/2

NPT 1/2

NPT 1/2

TBT-LDD-40

40:1

320

7.69

G1/2

NPT 1/2

NPT 1/2

TBT-LDD-64

64:1

512

4.94

G1/2

NPT 1/2

NPT 3/8

TBT-LDD-80

80:1

640

3.96

G1/2

NPT 1/2

NPT 3/8

TBT-LDD-100

100:1

800

3.13

G1/2

NPT 1/2

NPT 3/8

TBT-LDD-130

130:1

1040

2.4

G1/2

NPT 1/2

M14*1.5

TBT-LDD-175

175:1

1400

1.81

G1/2

NPT 3/8

M14*1.5

TBT-LDD-255

255:1

2040

1.23

G1/2

NPT 1/4

M14*1.5

TBT-LDD-400

400:1

3200

0.79

G1/2

NPT 1/4

M14*1.5

Hydraulic high pressure test machine -Computer control and Manual control type with armored glass protection cabinet.

Product picture :


1.CZPT Burst Pressure Test Benches is Special pressure testing equipment,   Provide pressure and bursting testing for various hydraulic hoses, valves, vessels, tubes and other hydraulic products.

2.They are use air driven hydraulic pump for liquid pressurization. Test pressure is up to maximally 320Mpa. Test medium can be water and hydraulic oil.

3.We have introduced the German technology to produce this high-performance test bench. The machine has a pneumatic pump and no electricity needed.

4.The machine is easy for operation with low noise and fast boosting. Testing liquid can be recycled. It played a important role in the improvement of quality and reliability.

Key features include:

1. Reliable ,Easy to Maintain ,compact and robust.
2. No heat, flame or spark risk
3. Infinitely variable output pressure and flow capability 
4. Air driven Models do not require electrical connection ,easy to apply automatic controls.
5. The piping system with non welded connection
6.Seals system designed for long working life, No lubricated required.
7. Wide range of standard and customized liquid pressure test systems
8.The test fluid system and driving fluid system are separated; it is more convenient for test temperature control and test media diversification
9.There are 3 different control modes available: Manual control, PLC control, Computer control
10.The use of high-speed sampling card sampling test data (computer control)
11.In the testing process, the pressure can be automatically compensated; time after the bursting pressure decreased rapidly, pressure automatic stop system;
12.The protection of tooling, special design, can effectively protect the damage of blasting operation personnel and equipment.
13. The realization computer control function, can be free to set up a water filled exhaust time, holding pressure time, aeration cleaning time, test pressure in the process of the experiment can be set arbitrarily single or multi section pressure maintaining test, can also holding pressure directly after blasting, boost the speed to maintain a constant, can realize adjustment and test data and curve parameters can real-time display, can automatically save the test results, and any print test reports. (computer control)
14. With comprehensive security protection; observation window with security protection mechanism which cannot operate before turn off.  Meanwhile with emergency stop switches, safety valves and other hardware protection measures.

Company Information

TEREK Company focus on provide various kinds of pneumatic and hydraulic booster pumps, booster systems, High pressure filling equipment, pressure testing system and fluid pressure solutions to the customers all over the world etc. With more than 18 years experiences in fluid pressure exchange and controlling field.

 

FAQ

 1.Q : Are you manufacturer ?

A: Yes, We are the manufacturer with continuous and improved R&D. Production,

Quality Check and service supply.

2.Q : Can I get your price list ?

A: Yes, Sure. In order to send you our available offered price. Please choose the products and let us know the product model and requirement in detail.

3.Q : Do you have stock for all items?

A:In general, we have some stock, while if you need a bulk order, we still need time to produce it. Of course, we will inform all details you before your payment.

4.Q : What is payment terms ?

A: Sample order : 100% full payment before start to production;

Large order : 30% deposit first, 70% pay after see the BL copy ;

5.Q: Can give free sample ?

A : Free : if small spare parts and the cost not too much is ok ;

Not Free : the cost expensive and all the machine can not be free ;

6.What about the services and product’ quality?

Each instruments must be carried out 100% quality examination and test when shipping

and delivery goods.  

Contact us

Any more questions, please contact us, and welcome to add my or for more details chat.

 

Screws and Screw Shafts

A screw is a mechanical device that holds objects together. Screws are usually forged or machined. They are also used in screw jacks and press-fitted vises. Their self-locking properties make them a popular choice in many different industries. Here are some of the benefits of screws and how they work. Also read about their self-locking properties. The following information will help you choose the right screw for your application.

Machined screw shaft

A machined screw shaft can be made of various materials, depending on the application. Screw shafts can be made from stainless steel, brass, bronze, titanium, or iron. Most manufacturers use high-precision CNC machines or lathes to manufacture these products. These products come in many sizes and shapes, and they have varying applications. Different materials are used for different sizes and shapes. Here are some examples of what you can use these screws for:
Screws are widely used in many applications. One of the most common uses is in holding objects together. This type of fastener is used in screw jacks, vises, and screw presses. The thread pitch of a screw can vary. Generally, a smaller pitch results in greater mechanical advantage. Hence, a machined screw shaft should be sized appropriately. This ensures that your product will last for a long time.
A machined screw shaft should be compatible with various threading systems. In general, the ASME system is used for threaded parts. The threaded hole occupies most of the shaft. The thread of the bolt occupy either part of the shaft, or the entire one. There are also alternatives to bolts, including riveting, rolling pins, and pinned shafts. These alternatives are not widely used today, but they are useful for certain niche applications.
If you are using a ball screw, you can choose to anneal the screw shaft. To anneal the screw shaft, use a water-soaked rag as a heat barrier. You can choose from 2 different options, depending on your application. One option is to cover the screw shaft with a dust-proof enclosure. Alternatively, you can install a protective heat barrier over the screw shaft. You can also choose to cover the screw shaft with a dust-proof machine.
If you need a smaller size, you can choose a smaller screw. It may be smaller than a quarter of an inch, but it may still be compatible with another part. The smaller ones, however, will often have a corresponding mating part. These parts are typically denominated by their ANSI numerical size designation, which does not indicate threads-per-inch. There is an industry standard for screw sizes that is a little easier to understand.
screwshaft

Ball screw nut

When choosing a Ball screw nut for a screw shaft, it is important to consider the critical speed of the machine. This value excites the natural frequency of a screw and determines how fast it can be turned. In other words, it varies with the screw diameter and unsupported length. It also depends on the screw shaft’s diameter and end fixity. Depending on the application, the nut can be run at a maximum speed of about 80% of its theoretical critical speed.
The inner return of a ball nut is a cross-over deflector that forces the balls to climb over the crest of the screw. In 1 revolution of the screw, a ball will cross over the nut crest to return to the screw. Similarly, the outer circuit is a circular shape. Both flanges have 1 contact point on the ball shaft, and the nut is connected to the screw shaft by a screw.
The accuracy of ball screws depends on several factors, including the manufacturing precision of the ball grooves, the compactness of the assembly, and the set-up precision of the nut. Depending on the application, the lead accuracy of a ball screw nut may vary significantly. To improve lead accuracy, preloading, and lubrication are important. Ewellix ball screw assembly specialists can help you determine the best option for your application.
A ball screw nut should be preloaded prior to installation in order to achieve the expected service life. The smallest amount of preload required can reduce a ball screw’s calculated life by as much as 90 percent. Using a lubricant of a standard grade is recommended. Some lubricants contain additives. Using grease or oil in place of oil can prolong the life of the screw.
A ball screw nut is a type of threaded nut that is used in a number of different applications. It works similar to a ball bearing in that it contains hardened steel balls that move along a series of inclined races. When choosing a ball screw nut, engineers should consider the following factors: speed, life span, mounting, and lubrication. In addition, there are other considerations, such as the environment in which the screw is used.
screwshaft

Self-locking property of screw shaft

A self-locking screw is 1 that is capable of rotating without the use of a lock washer or bolt. This property is dependent on a number of factors, but 1 of them is the pitch angle of the thread. A screw with a small pitch angle is less likely to self-lock, while a large pitch angle is more likely to spontaneously rotate. The limiting angle of a self-locking thread can be calculated by calculating the torque Mkdw at which the screw is first released.
The pitch angle of the screw’s threads and its coefficient of friction determine the self-locking function of the screw. Other factors that affect its self-locking function include environmental conditions, high or low temperature, and vibration. Self-locking screws are often used in single-line applications and are limited by the size of their pitch. Therefore, the self-locking property of the screw shaft depends on the specific application.
The self-locking feature of a screw is an important factor. If a screw is not in a state of motion, it can be a dangerous or unusable machine. The self-locking property of a screw is critical in many applications, from corkscrews to threaded pipe joints. Screws are also used as power linkages, although their use is rarely necessary for high-power operations. In the archimedes’ screw, for example, the blades of the screw rotate around an axis. A screw conveyor uses a rotating helical chamber to move materials. A micrometer uses a precision-calibrated screw to measure length.
Self-locking screws are commonly used in lead screw technology. Their pitch and coefficient of friction are important factors in determining the self-locking property of screws. This property is advantageous in many applications because it eliminates the need for a costly brake. Its self-locking property means that the screw will be secure without requiring a special kind of force or torque. There are many other factors that contribute to the self-locking property of a screw, but this is the most common factor.
Screws with right-hand threads have threads that angle up to the right. The opposite is true for left-hand screws. While turning a screw counter-clockwise will loosen it, a right-handed person will use a right-handed thumb-up to turn it. Similarly, a left-handed person will use their thumb to turn a screw counter-clockwise. And vice versa.
screwshaft

Materials used to manufacture screw shaft

Many materials are commonly used to manufacture screw shafts. The most common are steel, stainless steel, brass, bronze, and titanium. These materials have advantages and disadvantages that make them good candidates for screw production. Some screw types are also made of copper to fight corrosion and ensure durability over time. Other materials include nylon, Teflon, and aluminum. Brass screws are lightweight and have aesthetic appeal. The choice of material for a screw shaft depends on the use it will be made for.
Shafts are typically produced using 3 steps. Screws are manufactured from large coils, wire, or round bar stock. After these are produced, the blanks are cut to the appropriate length and cold headed. This cold working process pressudes features into the screw head. More complicated screw shapes may require 2 heading processes to achieve the desired shape. The process is very precise and accurate, so it is an ideal choice for screw manufacturing.
The type of material used to manufacture a screw shaft is crucial for the function it will serve. The type of material chosen will depend on where the screw is being used. If the screw is for an indoor project, you can opt for a cheaper, low-tech screw. But if the screw is for an outdoor project, you’ll need to use a specific type of screw. This is because outdoor screws will be exposed to humidity and temperature changes. Some screws may even be coated with a protective coating to protect them from the elements.
Screws can also be self-threading and self-tapping. The self-threading or self-tapping screw creates a complementary helix within the material. Other screws are made with a thread which cuts into the material it fastens. Other types of screws create a helical groove on softer material to provide compression. The most common uses of a screw include holding 2 components together.
There are many types of bolts available. Some are more expensive than others, but they are generally more resistant to corrosion. They can also be made from stainless steel or aluminum. But they require high-strength materials. If you’re wondering what screws are, consider this article. There are tons of options available for screw shaft manufacturing. You’ll be surprised how versatile they can be! The choice is yours, and you can be confident that you’ll find the screw shaft that will best fit your application.

China supplier Computer Control Water Hydraulic Test Bench for Plastic Pipe, Fire Pipe, Extinguisher   with Best SalesChina supplier Computer Control Water Hydraulic Test Bench for Plastic Pipe, Fire Pipe, Extinguisher   with Best Sales