Tag Archives: snacks making machine

China Professional Long-Lived Fried Snacks Processing Line Making Machine near me factory

Product Description

1.Description:

a.advanced double screw extruding technique

b. use wheat flour as main materials, and other nutritional ingredients can be added.

c. can produce flour bugles in different sizes, you can also produce fish shapes, moon shapes etc. by changing the processing rollers of the shaper.

d. such double screw extruder can also produce other products, like leisure snacks, breakfast cereal, nutritional rice and powder, bread crumb, crispy rice chip, etc.

e. convenient operation and maintenance, low power consumption, high output are its characteristics.

2. Raw materials: adopts wheat flour, rice flour,  vegetable oil, salt etc. as raw materials.

3. Products: This line can be used to produce bugles, tortilla chips, snacks, cereals by adjusting the moulds from extruder; 

4. Capacity: 150kg/h, 240kg/h

 5. Flow chart:Mixing system—Extrusion system—frying system—-Flavoring system—Packing system

6. Voltage in China: Three phases: 380V/50Hz, Single phase: 220V/50Hz, we can make it according to customers’ Local voltage according to different countries

7. Machines Materials:All the machines are made by stainless steel

8.Packaging &shipping

1. Packing:  The product will be packed into wooden case, then into containers. 

2. Transportation: According to what the buyer’s requirement, we provide transport agent, buyer pay the transfer fee.

 

Model Installed power Real power Output Dimension
MT-65 142kw 100kw 100-150kg/h 22000x1200x2200mm
MT-70 185kw 130kw 200-240kg/h 24000x1500x2200mm

Main Features

1) Simple structure in linear type ,easy in installation and maintation. 
2) Adopting advanced world famous brand components in pneumatic parts ,electric parts and operation parts. 
3) High pressure double crank to control the die opening and closing. 
4) Running in a high automatization and intellectualization,no pollution 
5) Apply a linker to connect with the air conveyor ,which can directly inline with filling machine
Our sevices 
1.  Pre-sale services:
 Act as a good adviser and assistant of clients, enable them to get rich and generous returns on their investments.  
1.. Select equipment model;  

2.. Design and manufacture products according to clients’ special requirement;
3.. Train technical personnel for clients. 
 
2.  Services during the sale:
Respect clients, devote ourselves to improving the total value of clients.  
1.. Pre-check and accept products ahead of delivery;  
2.. Help clients to draft solving plans.  
 
3. After-sale services:
Provide considerate services to minimize clients’ worries.  
1.. Assist clients to prepare for the first construction scheme;  
2.. Install and debug the equipment;  
3.. Train the first-line operators;
4.. Examine the equipment;
5.. Take initiative to eliminate the troubles rapidly;
6.. Provide perfect service;
7.. Provide technical exchanging.

FAQ
1. Q: Are you a trading company or a manufacturer?
 A: We are the manufacturer, which has almost 10 years of experience in this industry.
 
2. Q: How can I get to your company?
A: That’s great you can visit our factory, welcome! You can get a flight to HangZhou Airport. Our factories are just about 30 minutes drive away from HangZhou Airport.We are so glad to arrange our car pick you up!
 
3. Q: How long is your guarantee?
A: One year(Calculated from the equipment arrives the customer’s side.).
 After this period we will definitely support you when needed.
 You will be welcome to contact us with any problem may happened.
 
4. Q: Will you send engineers to install the plant?
A: yes, but at an extra cost payable by the customer. 
Or you can get local contractors to do the commissioning and we send one supervising engineer.

How to Identify a Faulty Drive Shaft

The most common problems associated with automotive driveshafts include clicking and rubbing noises. While driving, the noise from the driver’s seat is often noticeable. An experienced auto mechanic can easily identify whether the sound is coming from both sides or from 1 side. If you notice any of these signs, it’s time to send your car in for a proper diagnosis. Here’s a guide to determining if your car’s driveshaft is faulty:
air-compressor

Symptoms of Driveshaft Failure

If you’re having trouble turning your car, it’s time to check your vehicle’s driveshaft. A bad driveshaft can limit the overall control of your car, and you should fix it as soon as possible to avoid further problems. Other symptoms of a propshaft failure include strange noises from under the vehicle and difficulty shifting gears. Squeaking from under the vehicle is another sign of a faulty driveshaft.
If your driveshaft fails, your car will stop. Although the engine will still run, the wheels will not turn. You may hear strange noises from under the vehicle, but this is a rare symptom of a propshaft failure. However, you will have plenty of time to fix the problem. If you don’t hear any noise, the problem is not affecting your vehicle’s ability to move.
The most obvious signs of a driveshaft failure are dull sounds, squeaks or vibrations. If the drive shaft is unbalanced, it is likely to damage the transmission. It will require a trailer to remove it from your vehicle. Apart from that, it can also affect your car’s performance and require repairs. So if you hear these signs in your car, be sure to have it checked by a mechanic right away.

Drive shaft assembly

When designing a propshaft, the design should be based on the torque required to drive the vehicle. When this torque is too high, it can cause irreversible failure of the drive shaft. Therefore, a good drive shaft design should have a long service life. Here are some tips to help you design a good driveshaft. Some of the main components of the driveshaft are listed below.
Snap Ring: The snap ring is a removable part that secures the bearing cup assembly in the yoke cross hole. It also has a groove for locating the snap ring. Spline: A spline is a patented tubular machined element with a series of ridges that fit into the grooves of the mating piece. The bearing cup assembly consists of a shaft and end fittings.
U-joint: U-joint is required due to the angular displacement between the T-shaped housing and the pinion. This angle is especially large in raised 4x4s. The design of the U-joint must guarantee a constant rotational speed. Proper driveshaft design must account for the difference in angular velocity between the shafts. The T-bracket and output shaft are attached to the bearing caps at both ends.
air-compressor

U-joint

Your vehicle has a set of U-joints on the driveshaft. If your vehicle needs to be replaced, you can do it yourself. You will need a hammer, ratchet and socket. In order to remove the U-joint, you must first remove the bearing cup. In some cases you will need to use a hammer to remove the bearing cup, you should be careful as you don’t want to damage the drive shaft. If you cannot remove the bearing cup, you can also use a vise to press it out.
There are 2 types of U-joints. One is held by a yoke and the other is held by a c-clamp. A full ring is safer and ideal for vehicles that are often used off-road. In some cases, a full circle can be used to repair a c-clamp u-joint.
In addition to excessive torque, extreme loads and improper lubrication are common causes of U-joint failure. The U-joint on the driveshaft can also be damaged if the engine is modified. If you are driving a vehicle with a heavily modified engine, it is not enough to replace the OE U-joint. In this case, it is important to take the time to properly lubricate these components as needed to keep them functional.

tube yoke

QU40866 Tube Yoke is a common replacement for damaged or damaged driveshaft tubes. They are desirably made of a metallic material, such as an aluminum alloy, and include a hollow portion with a lug structure at 1 end. Tube yokes can be manufactured using a variety of methods, including casting and forging. A common method involves drawing solid elements and machining them into the final shape. The resulting components are less expensive to produce, especially when compared to other forms.
The tube fork has a connection point to the driveshaft tube. The lug structure provides attachment points for the gimbal. Typically, the driveshaft tube is 5 inches in diameter and the lug structure is 4 inches in diameter. The lug structure also serves as a mounting point for the drive shaft. Once installed, Tube Yoke is easy to maintain. There are 2 types of lug structures: 1 is forged tube yoke and the other is welded.
Heavy-duty series drive shafts use bearing plates to secure the yoke to the U-joint. All other dimensions are secured with external snap rings. Yokes are usually machined to accept U-bolts. For some applications, grease fittings are used. This attachment is more suitable for off-road vehicles and performance vehicles.
air-compressor

end yoke

The end yoke of the drive shaft is an integral part of the drive train. Choosing a high-quality end yoke will help ensure long-term operation and prevent premature failure. Pat’s Driveline offers a complete line of automotive end yokes for power take-offs, differentials and auxiliary equipment. They can also measure your existing parts and provide you with high quality replacements.
A U-bolt is an industrial fastener with threaded legs. When used on a driveshaft, it provides greater stability in unstable terrain. You can purchase a U-bolt kit to secure the pinion carrier to the drive shaft. U-bolts also come with lock washers and nuts. Performance cars and off-road vehicles often use this type of attachment. But before you install it, you have to make sure the yoke is machined to accept it.
End yokes can be made of aluminum or steel and are designed to provide strength. It also offers special bolt styles for various applications. CZPT’s drivetrain is also stocked with a full line of automotive flange yokes. The company also produces custom flanged yokes for many popular brands. Since the company has a comprehensive line of replacement flange yokes, it can help you transform your drivetrain from non-serviceable to serviceable.

bushing

The first step in repairing or replacing an automotive driveshaft is to replace worn or damaged bushings. These bushings are located inside the drive shaft to provide a smooth, safe ride. The shaft rotates in a rubber sleeve. If a bushing needs to be replaced, you should first check the manual for recommendations. Some of these components may also need to be replaced, such as the clutch or swingarm.

China Professional Long-Lived Fried Snacks Processing Line Making Machine   near me factory China Professional Long-Lived Fried Snacks Processing Line Making Machine   near me factory