we designed 1050ES Automatic Stripping Die Cutting Machine,; which is the greatest research and development and manufacturing of new equipment with a higher degree of intelligence.;
This machine adopts numerous advanced pneumatic and servo driving processing technology from abroad.; After the strict assembly quality control,; it has advantage of simple operation and safe reliable.;
It could creasing,; die cutting and stripping after printing products,; such as more than 80g/m2 paper,; cardboard,; corrugated paper below 4mm,; pasting paper,; laminating paper and so on.;
Good quality and design makes machine work stably and safety when machine’s speed reach 7500 sheets/h.; This machine will provide you to enjoy the comfortable operation and faster return on investment.;
1.; Feeder/Feeding Section
The design of stacker preparatory stage was improved,; it could use prepared car sheet piling.; Also could use ordinary hydraulic car sheet piling to stacker directly.; The machine has 4 suction nozzles and 4 sending nozzles in feeder,; ensure feed smoothly.; Adopt import screw air-blowing device,; it could make the sheet send smoothly.;
2.; Feeding Positioning Section
The incline-type paper moving table top is more suitable to high-speed thin paper and location.; Side location adopt dual purpose side device with pull CZPT and push guide,; accounting to paper choose,; it makes switch easier.; It could switch front rise position arriving reduction of speed device,; it is benefit of thin paper’s location.;
3.; Die Cutting Section
The driving gear ensures high speed of die cutting together.; The pneumatic locking mechanism and air clutch are fast and stable.; The die cutting frame can prevent the die cutting plate from drooping or separating effectively.;
4.; Stripping Section
A triple-interlocked-piece stripping device,; action harmony,; precision effectively,; can effectively remove all kinds of special waste
5.; Delivery Section
Delivery section add tester into security system.; It is equipped with inset counter.; Using subsection could adjust brush and sheet air-blowing device,; so the finished product of delivery section could product stably.; Gripper drive train expanded buffer device.;
Other important features:;
1.; Pneumatic Clutch
The imported high quality pneumatic clutch reduces noise and minimizes impact when stopping the machine at a high speed.;
2.; Lubrication System
With a programmable lubrication system,; the accurate control of PLC ensures balanced lubrication of the machine.;
3.; Air Pump
Adopt imported equipment,; improve the stability of the machine,; low noise,; high performance,; long service life.;
4.; Gripper and Chain
The grippers are made of special extra hard aluminum alloy,; with anode treatment on the surface,; ensuring accurate die cutting and embossing,; ect.; at high speed.; The adjustment mechanism,; patent design guarantees very accurate control.; An imported chain is used for the main gripper transmission,; with strength increased by 45% for accurate stability and prolonged life.;
|Automatic Stripping Die Cutting Machine
|Max.; Sheet Size
|Min.; Sheet Size
|Max.; Cutting Range
|Inner Chase Size
|Die Cutting Steel Plate Size
|80-2000 g/m2 Cardboard
|Min.; Grabbing-sheet Width
|Max.; Mechanical Speed
|Max.; Die Cutting Pressure
|Max.; Feeding Pile Height
|Max.; Delivery Pile Height
|0.;8Mpa,; 0.;36m3/min,; 3kw
The Benefits of Spline Couplings for Disc Brake Mounting Interfaces
Spline couplings are commonly used for securing disc brake mounting interfaces. Spline couplings are often used in high-performance vehicles, aeronautics, and many other applications. However, the mechanical benefits of splines are not immediately obvious. Listed below are the benefits of spline couplings. We’ll discuss what these advantages mean for you. Read on to discover how these couplings work.
Disc brake mounting interfaces are splined
There are 2 common disc brake mounting interfaces – splined and six-bolt. Splined rotors fit on splined hubs; six-bolt rotors will need an adapter to fit on six-bolt hubs. The six-bolt method is easier to maintain and may be preferred by many cyclists. If you’re thinking of installing a disc brake system, it is important to know how to choose the right splined and center lock interfaces.
The splines used for spline coupling in aircraft are highly complex. While some previous researches have addressed the design of splines, few publications have tackled the problem of misaligned spline coupling. Nevertheless, the accurate results we obtained were obtained using dedicated simulation tools, which are not commercially available. Nevertheless, such tools can provide a useful reference for our approach. It would be beneficial if designers could use simple tools for evaluating contact pressure peaks. Our analytical approach makes it possible to find answers to such questions.
The design of a spline coupling for aerospace applications must be accurate to minimize weight and prevent failure mechanisms. In addition to weight reduction, it is necessary to minimize fretting fatigue. The pressure distribution on the spline coupling teeth is a significant factor in determining its fretting fatigue. Therefore, we use analytical and experimental methods to examine the contact pressure distribution in the axial direction of spline couplings.
The teeth of a spline coupling can be categorized by the type of engagement they provide. This study investigates the position of resultant contact forces in the teeth of a spline coupling when applied to pitch diameter. Using FEM models, numerical results are generated for nominal and parallel offset misalignments. The axial tooth profile determines the behavior of the coupling component and its ability to resist wear. Angular misalignment is also a concern, causing misalignment.
In order to assess wear damage of a spline coupling, we must take into consideration the impact of fretting on the components. This wear is caused by relative motion between the teeth that engage them. The misalignment may be caused by vibrations, cyclical tooth deflection, or angular misalignment. The result of this analysis may help designers improve their spline coupling designs and develop improved performance.
CZPT polyimide, an abrasion-resistant polymer, is a popular choice for high-temperature spline couplings. This material reduces friction and wear, provides a low friction surface, and has a low wear rate. Furthermore, it offers up to 50 times the life of metal on metal spline connections. For these reasons, it is important to choose the right material for your spline coupling.
A spline coupler is a device used to connect splined shafts. A typical spline coupler resembles a short pipe with splines on either end. There are 2 basic types of spline coupling: single and dual spline. One type attaches to a drive shaft, while the other attaches to the gearbox. While spline couplings are typically used in racing, they’re also used for performance problems.
The key challenge in spline couplings is to determine the optimal dimension of spline joints. This is difficult because no commercial codes allow the simulation of misaligned joints, which can destroy components. This article presents analytical approaches to estimating contact pressures in spline connections. The results are comparable with numerical approaches but require special codes to accurately model the coupling operation. This research highlights several important issues and aims to make the application of spline couplings in high-performance vehicles easier.
The stiffness of spline assemblies can be calculated using tooth-like structures. Such splines can be incorporated into the spline joint to produce global stiffness for torsional vibration analysis. Bearing reactions are calculated for a certain level of misalignment. This information can be used to design bearing dimensions and correct misalignment. There are 3 types of spline couplings.
Major diameter fit splines are made with tightly controlled outside diameters. This close fit provides concentricity transfer from the male to the female spline. The teeth of the male spline usually have chamfered tips and clearance with fillet radii. These splines are often manufactured from billet steel or aluminum. These materials are renowned for their strength and uniform grain created by the forging process. ANSI and DIN design manuals define classes of fit.
Disc brake mounting interfaces
A spline coupling for disc brake mounting interfaces is a type of hub-to-brake-disc mount. It is a highly durable coupling mechanism that reduces heat transfer from the disc to the axle hub. The mounting arrangement also isolates the axle hub from direct contact with the disc. It is also designed to minimize the amount of vehicle downtime and maintenance required to maintain proper alignment.
Disc brakes typically have substantial metal-to-metal contact with axle hub splines. The discs are held in place on the hub by intermediate inserts. This metal-to-metal contact also aids in the transfer of brake heat from the brake disc to the axle hub. Spline coupling for disc brake mounting interfaces comprises a mounting ring that is either a threaded or non-threaded spline.
During drag brake experiments, perforated friction blocks filled with various additive materials are introduced. The materials included include Cu-based powder metallurgy material, a composite material, and a Mn-Cu damping alloy. The filling material affects the braking interface’s wear behavior and friction-induced vibration characteristics. Different filling materials produce different types of wear debris and have different wear evolutions. They also differ in their surface morphology.
Disc brake couplings are usually made of 2 different types. The plain and HD versions are interchangeable. The plain version is the simplest to install, while the HD version has multiple components. The two-piece couplings are often installed at the same time, but with different mounting interfaces. You should make sure to purchase the appropriate coupling for your vehicle. These interfaces are a vital component of your vehicle and must be installed correctly for proper operation.
Disc brakes use disc-to-hub elements that help locate the forces and displace them to the rim. These elements are typically made of stainless steel, which increases the cost of manufacturing the disc brake mounting interface. Despite their benefits, however, the high braking force loads they endure are hard on the materials. Moreover, excessive heat transferred to the intermediate elements can adversely affect the fatigue life and long-term strength of the brake system.