China BPW German Type Axle for 16t Semi Trailer Parts axle boot

Item Description

Item Description

Luen Truck Trailer Parts German BPW Variety Axle with Observe 1840mm
1. One-piece shaft tube, higher power, cozy physical appearance.
2. When compared with other axles of the very same load, it is light-weight in weight and reduced in cost. 
3. Making use of non-asbestos friction plate, more environmentally welcoming.
four. Adopting international standard specs, routine maintenance is practical, quick and low cost.

Model

Ability
(kg)

Monitor(mm)

Axle Tube
(mm)

Brake Dimensions

PCD
(mm)

Complete Length
(mm)

Suggested Wheel

LHGA-F12T

12000

1840

○127

420*one hundred eighty

335

2165

seven.5V-twenty

LHGA-F14T

14000

1840

○127

420*200

335

2185

7.5V-20

LHGA-F16T

16000

1850

150

420*200

335

2185

7.5V-20

Components
It adopts higher-top quality accessories from key manufacturers at residence and overseas, and global common German
axle specs. It has strong practicability, reduced price tag and handy upkeep.
Axle
The manufacturing unit makes its personal shaft tube with quality assurance and cost gain. The assembly procedure
strictly abides by global quality requirements to generate large-top quality goods.

Organization Profile

Other Goods

Certifications

The manufacturing facility has acquired ISO9001 certification and Alibaba SGS certification, and has much more
than a dozen patent certificates. It is a famous brand name organization in China.

Client Photos

Our company crew participates in far more than ten exhibitions at property and abroad each and every 12 months,
checking out and getting consumers dozens of times, and welcomes each and every customer’s inquiry and
factory inspection.

Packaging & Shipping

 

Get in touch with Us

 

  

 

Type: Rear Axles
Certification: ISO9001
Loading Weight: 16t
ABS: With ABS
Tent Type: Simple
Axle Number: 3

###

Samples:
US$ 360/units
1 units(Min.Order)

|
Request Sample

###

Customization:

###

Model
Capacity
(kg)
Track(mm)
Axle Tube
(mm)
Brake Size
PCD
(mm)
Total Length
(mm)
Recommended Wheel
LHGA-F12T
12000
1840
○127
420*180
335
2165
7.5V-20
LHGA-F14T
14000
1840
○127
420*200
335
2185
7.5V-20
LHGA-F16T
16000
1850
150
420*200
335
2185
7.5V-20
Type: Rear Axles
Certification: ISO9001
Loading Weight: 16t
ABS: With ABS
Tent Type: Simple
Axle Number: 3

###

Samples:
US$ 360/units
1 units(Min.Order)

|
Request Sample

###

Customization:

###

Model
Capacity
(kg)
Track(mm)
Axle Tube
(mm)
Brake Size
PCD
(mm)
Total Length
(mm)
Recommended Wheel
LHGA-F12T
12000
1840
○127
420*180
335
2165
7.5V-20
LHGA-F14T
14000
1840
○127
420*200
335
2185
7.5V-20
LHGA-F16T
16000
1850
150
420*200
335
2185
7.5V-20

The Different Types of Axles

An axle is the central shaft of a gear or wheel. Axles are either fixed to the wheels or fixed to the vehicle. In some cases, they rotate together with the wheels and vehicle. The axle may also include bearings and mounting points. There are many types of axles, and it is important to understand the difference between each type.

Transaxle

The transaxle is the single mechanical device that combines the functions of a car’s differential, axle and transmission. It’s produced in manual and automatic models. A manual version is the preferred one for everyday driving, while an automatic one is more efficient in preventing vehicle damage. Here are some basics about the transaxle.
Transaxles are essential components of a car’s drivetrain, and any problems can cause major damage and leave the driver stranded. Transaxles include the transmission and the differential, which transfer the engine’s power to the wheels. Taking the time to check the transaxle is important to ensure that everything is functioning properly.
The transaxle is a very complex machine that combines the functions of the final drive and the transmission into one compact unit. The transaxle is a very versatile piece of automotive technology, and is an essential component of a front-wheel-drive car. In addition to conventional front-wheel-drive vehicles, many modern rear-wheel-drive vehicles use a transaxle to provide more even weight distribution.
The first American car to use a transaxle was the Cord 810 in the early 1920s. It was well ahead of its time, but was unsuccessful. For many years, the front-wheel drive automobile was absent from the United States automotive scene. It wasn’t until the 1960s that a front-wheel drive automobile re-emerged. A front-wheel-drive automobile, known as a transaxle, was the first to reach the market, and it’s not the only car to use this gearing.
A transaxle is a good option for vehicles with an extreme amount of torque. This system can handle powerful engine designs while keeping weight in the engine bay. It is not a perfect solution for all vehicles, however. In some vehicles, the extra weight added to the engine bay will affect the performance. The added weight will reduce traction. In addition, a transaxle mounts behind the engine, which adds weight to the rear.
Transaxles are the primary part of vehicles that have front-wheel drive. Their purpose is to transmit power from the engine to the drive wheels. The front-wheel-drive assembly had 2 short axles with complicated ball joints.
Axles

Full-floating axle

A full-floating axle is different from a semi-floating axle in several ways. A semi-floating axle is used for rear wheel drive cars, where it has a bearing mounted in the axle shaft. This axle supports the vehicle’s weight and transmits the drive torque from the transmission to the wheels. However, a semi-floating axle’s load capacity is limited by the size of the axle bearing. A full-floating axle, on the other hand, has the bearing mounted on the outside of the axle tube. The bearing is the only part of the axle that supports the vehicle, and the hub and bearing assembly are held together by a large nut.
The drive axle on a full-floating axle is splined at both ends so that it can easily be removed from the rear of a vehicle without removing the wheel. This type of axle makes it possible to change gears quickly and easily. Because of this, it’s not necessary to remove the wheels and tires in order to replace the axle. Instead, a common tool used to remove the axle from the wheel hub is an axle wrench.
Full-floating axles are more common in heavy-duty vehicles. The ability to carry heavy loads without causing the axle to break is a big advantage to full-floating axles. These axles require less maintenance and require less bends than traditional axles and may even be worth the extra investment if you have a heavy load to carry.
A full-floating axle allows the driver to change a broken axle shaft without having to remove the entire wheel. A full-floating axle will also allow the driver to remove the axle shaft without having to take off the wheel. Full-floating axles are also more durable than semi-floaters, which have weight resting on the axle tubes and housing.
While a full-floating axle is more expensive to manufacture, it is better for heavier vehicles that carry heavy loads. It is better to choose a full-floating axle if you have a heavy load or plan on towing.
Axles

Three-quarter floater

A three-quarter floating axle is a type of floating axle that’s a compromise between the full and semi-floating types. Its bearings are located on the axle casing rather than on the hub, which means that it’s less susceptible to axle breakdown. However, it’s not as robust as a full floating axle.
This design combines the benefits of fully-floating axles with the simplicity of a semi-floating axle. Instead of having multiple wheel bearings, a single wheel bearing is installed in the center of the hub. The hub is then keyed rigidly to the axle shaft, providing a connecting connection and maintaining wheel alignment.
While a full-floating axle is the most common style of truck axle, you may see the three-quarter floater on the side of a pickup. It was common for 3/4-ton Gms to use these axles until the 1980s. Dodge and Ford also used a semi-float axle called a Dana 60. The difference between the two types of axles is the amount of support provided by the axleshaft and hub, and the number of lug nuts on the axleshaft and hub are different.
The three-quarter floater axle drive assembly of the present invention is illustrated in FIG. 1. The axle housing comprises an elongated axle tube 12, a hub member 30, and a hub shaft 16. A hub member 30 is rotatably supported on the axle tube 12 by an anti-friction bearing assembly 42. The axle shaft is retained in place by a domed plate 26.
This axle design has two main advantages. First, it transfers the weight of the vehicle to the axle casing. It also helps transfer the driving torque and side thrust to the wheel. This type of axle also has a differential cross shaft, which limits inward axial movement of the axle shaft.
Axles

Dead axle

A Dead axle is a structural component that supports the rear wheel of a vehicle. It can either be straight or angled and is located behind the drive axle. Depending on the vehicle, the dead axle may be steerable. Tag axles are also common on agricultural equipment and certain heavy construction machinery. They are also known as lazy axles because they only contact the ground when a vehicle is carrying a significant load, thus saving tire wear. Dead axles may be rigid or flexible.
Some rear dead axles can also be configured as an air tank. The air is taken in and out of the rear dead axle through the port portions of the rear axle. This can reduce the size of the air tank. For this reason, it is a preferred design for rear dead axles. While most vehicles are equipped with two axles, the rear axle can be used to accommodate cargo.
FIG. 1 is a schematic plan view of a vehicle with two rear axles. The front axle is called the drive axle and the rear dead axle is called the dead axle. These components are located on a truck body frame. There are also battery and fuel tanks. They are used to distribute driving force from the front to rear wheels.
An axle is a crucial component of a vehicle. It transfers power from the engine to the wheels. A live axle is connected to the drive shaft and transmission, while a dead axle receives no direct power. This is the main difference between a live and dead axle. Although a dead axle is not as useful as a live one, it is still essential to understand what drives a car.
Dead axles are used in many vehicles for different purposes. Many large trucks are fitted with several of them for load bearing purposes. They also help distribute weight.
China BPW German Type Axle for 16t Semi Trailer Parts     axle bootChina BPW German Type Axle for 16t Semi Trailer Parts     axle boot
editor by czh 2022-12-17