Product Description

 

Product name	Amazon hot sale rehabilitation therapy supplies
Model	YS-HR03
Dimensions	240*160*240 (mm)
Weight	3KG
Power supply	AC220V, 50Hz
Duration of training	0-60 minutes
Running speed	90°~150°/s
Safety pressure output by the host	-70Kpa~150Kpa
Ambient temperature	5~40ºC
Relative humidity	≤ 80%

Stroke rehabilitation equipment treatment or recovery:

Cerebral palsy, cerebral infarction, cerebral hemorrhage, cerebral apoplexy, and hemiplegia and other such series of hand dysfunctions or missing, such as brain or hand nerve damage, fractures, car accident injuries, burns, Others such as hand dysfunction caused by spinal cord injury can also be used, as long as it is hand dysfunction, hand discomfort, and hand inflexibility.
Our pneumatic rehabilitation robot gloves can be used for high muscle tension, palm bending, curling, finger spasm, paralysis, paralysis, etc. Soft rehabilitation robot gloves use bionic pneumatic artificial muscles to drive finger joints, causing finger spasm, Symptoms such as paralysis and paralysis have been improved or recovered. While effectively helping the rehabilitation of various functions of the hand, the product also acts on assisting the brain nerves, promoting the improvement of sports rehabilitation, etc.

 

 

Feature and advantage:

• Combined with flexible robot technology and neuroscience, it can help patients relieve hand spasm and stiffness, and promote patients’ motor relearning.
• Patients can recover at home by themselves, save the cost of rehabilitation hospital and accompanying care, independently complete the daily rehabilitation training plan, and carry out functional task-oriented training, including daily activity training such as stretching, machine holding, etc, as well as rehabilitation training under the real situation at home, so as to increase the initiative.
• Using air pressure as a driving force, automatic finger grasping and stretching is the rehabilitation treatment equipment for finger spasm, paralysis and other symptoms. It can reduce the muscle tension of the hand, relieve edema and stiffness, accelerate the rehabilitation process of hand function, and promote the recovery of cerebral nerve injury, so as to achieve the goal of rehabilitation.
• The glove can buffer and protect the metacarpophalangeal joint and the interprocedural joint, and can gently promote the sensory stimulation of the hand after stroke through the pneumatic pump, so as to complete the flexion and extension of the fingers.

The cutting edge robot Glove helps clients suffering from neurological and orthopedic injuries incorporate their hand functionally in therapy and at home.
The proprietary tension system extends the client’s fingers and thumb following grasping.
The lightweight, low-profile functional design is just 1 of the many innovative features that are offered with the robot glove.

1. How soon can I get the product?
After getting your approval, we ship in 1-3 business days. Shipping can be via FedEx, DHL, UPS ,TNT or post at your option.

2. What about the lead time for mass production?
It depends on specific product and its order quantity. Normally, min 7 days are required.

3. How to use the rehabilitation robot equipment ?
We have 2 version hand rehabilitation robot equipment, 1 is for hospital use, another 1 is home use, there are detailed instructions in the package. We will also send you a video for your reference. You can also consult our rehabilitation therapist online.

4.Q:Do you offer OEM and ODM services?
Yes, we can offer you better OEM and ODM services.

5.Are you a trading company or original manufacturer ?
We are manufacturer, we have our own R&D Department, QC/QA Department , we has launched “YISHENGR Rehabilitation Robot Gloves” and “Assist Soft Exoskeleton EasyWalk X1”, with more than 20 patents and clinical recognition of hundreds of hospitals.

6.Still have questions? Contact us now:
ZheJiang Siyi Intelligence – Professional rehabilitation equipment supplier.

How to Calculate the Diameter of a Worm Gear

In this article, we will discuss the characteristics of the Duplex, Single-throated, and Undercut worm gears and the analysis of worm shaft deflection. Besides that, we will explore how the diameter of a worm gear is calculated. If you have any doubt about the function of a worm gear, you can refer to the table below. Also, keep in mind that a worm gear has several important parameters which determine its working.

Duplex worm gear

A duplex worm gear set is distinguished by its ability to maintain precise angles and high gear ratios. The backlash of the gearing can be readjusted several times. The axial position of the worm shaft can be determined by adjusting screws on the housing cover. This feature allows for low backlash engagement of the worm tooth pitch with the worm gear. This feature is especially beneficial when backlash is a critical factor when selecting gears.
The standard worm gear shaft requires less lubrication than its dual counterpart. Worm gears are difficult to lubricate because they are sliding rather than rotating. They also have fewer moving parts and fewer points of failure. The disadvantage of a worm gear is that you cannot reverse the direction of power due to friction between the worm and the wheel. Because of this, they are best used in machines that operate at low speeds.
Worm wheels have teeth that form a helix. This helix produces axial thrust forces, depending on the hand of the helix and the direction of rotation. To handle these forces, the worms should be mounted securely using dowel pins, step shafts, and dowel pins. To prevent the worm from shifting, the worm wheel axis must be aligned with the center of the worm wheel’s face width.
The backlash of the CZPT duplex worm gear is adjustable. By shifting the worm axially, the section of the worm with the desired tooth thickness is in contact with the wheel. As a result, the backlash is adjustable. Worm gears are an excellent choice for rotary tables, high-precision reversing applications, and ultra-low-backlash gearboxes. Axial shift backlash is a major advantage of duplex worm gears, and this feature translates into a simple and fast assembly process.
When choosing a gear set, the size and lubrication process will be crucial. If you’re not careful, you might end up with a damaged gear or 1 with improper backlash. Luckily, there are some simple ways to maintain the proper tooth contact and backlash of your worm gears, ensuring long-term reliability and performance. As with any gear set, proper lubrication will ensure your worm gears last for years to come.

Single-throated worm gear

Worm gears mesh by sliding and rolling motions, but sliding contact dominates at high reduction ratios. Worm gears’ efficiency is limited by the friction and heat generated during sliding, so lubrication is necessary to maintain optimal efficiency. The worm and gear are usually made of dissimilar metals, such as phosphor-bronze or hardened steel. MC nylon, a synthetic engineering plastic, is often used for the shaft.
Worm gears are highly efficient in transmission of power and are adaptable to various types of machinery and devices. Their low output speed and high torque make them a popular choice for power transmission. A single-throated worm gear is easy to assemble and lock. A double-throated worm gear requires 2 shafts, 1 for each worm gear. Both styles are efficient in high-torque applications.
Worm gears are widely used in power transmission applications because of their low speed and compact design. A numerical model was developed to calculate the quasi-static load sharing between gears and mating surfaces. The influence coefficient method allows fast computing of the deformation of the gear surface and local contact of the mating surfaces. The resultant analysis shows that a single-throated worm gear can reduce the amount of energy required to drive an electric motor.
In addition to the wear caused by friction, a worm wheel can experience additional wear. Because the worm wheel is softer than the worm, most of the wear occurs on the wheel. In fact, the number of teeth on a worm wheel should not match its thread count. A single-throated worm gear shaft can increase the efficiency of a machine by as much as 35%. In addition, it can lower the cost of running.
A worm gear is used when the diametrical pitch of the worm wheel and worm gear are the same. If the diametrical pitch of both gears is the same, the 2 worms will mesh properly. In addition, the worm wheel and worm will be attached to each other with a set screw. This screw is inserted into the hub and then secured with a locknut.

Undercut worm gear

Undercut worm gears have a cylindrical shaft, and their teeth are shaped in an evolution-like pattern. Worms are made of a hardened cemented metal, 16MnCr5. The number of gear teeth is determined by the pressure angle at the zero gearing correction. The teeth are convex in normal and centre-line sections. The diameter of the worm is determined by the worm’s tangential profile, d1. Undercut worm gears are used when the number of teeth in the cylinder is large, and when the shaft is rigid enough to resist excessive load.
The center-line distance of the worm gears is the distance from the worm centre to the outer diameter. This distance affects the worm’s deflection and its safety. Enter a specific value for the bearing distance. Then, the software proposes a range of suitable solutions based on the number of teeth and the module. The table of solutions contains various options, and the selected variant is transferred to the main calculation.
A pressure-angle-angle-compensated worm can be manufactured using single-pointed lathe tools or end mills. The worm’s diameter and depth are influenced by the cutter used. In addition, the diameter of the grinding wheel determines the profile of the worm. If the worm is cut too deep, it will result in undercutting. Despite the undercutting risk, the design of worm gearing is flexible and allows considerable freedom.
The reduction ratio of a worm gear is massive. With only a little effort, the worm gear can significantly reduce speed and torque. In contrast, conventional gear sets need to make multiple reductions to get the same reduction level. Worm gears also have several disadvantages. Worm gears can’t reverse the direction of power because the friction between the worm and the wheel makes this impossible. The worm gear can’t reverse the direction of power, but the worm moves from 1 direction to another.
The process of undercutting is closely related to the profile of the worm. The worm’s profile will vary depending on the worm diameter, lead angle, and grinding wheel diameter. The worm’s profile will change if the generating process has removed material from the tooth base. A small undercut reduces tooth strength and reduces contact. For smaller gears, a minimum of 14-1/2degPA gears should be used.

Analysis of worm shaft deflection

To analyze the worm shaft deflection, we first derived its maximum deflection value. The deflection is calculated using the Euler-Bernoulli method and Timoshenko shear deformation. Then, we calculated the moment of inertia and the area of the transverse section using CAD software. In our analysis, we used the results of the test to compare the resulting parameters with the theoretical ones.
We can use the resulting centre-line distance and worm gear tooth profiles to calculate the required worm deflection. Using these values, we can use the worm gear deflection analysis to ensure the correct bearing size and worm gear teeth. Once we have these values, we can transfer them to the main calculation. Then, we can calculate the worm deflection and its safety. Then, we enter the values into the appropriate tables, and the resulting solutions are automatically transferred into the main calculation. However, we have to keep in mind that the deflection value will not be considered safe if it is larger than the worm gear’s outer diameter.
We use a four-stage process for investigating worm shaft deflection. We first apply the finite element method to compute the deflection and compare the simulation results with the experimentally tested worm shafts. Finally, we perform parameter studies with 15 worm gear toothings without considering the shaft geometry. This step is the first of 4 stages of the investigation. Once we have calculated the deflection, we can use the simulation results to determine the parameters needed to optimize the design.
Using a calculation system to calculate worm shaft deflection, we can determine the efficiency of worm gears. There are several parameters to optimize gearing efficiency, including material and geometry, and lubricant. In addition, we can reduce the bearing losses, which are caused by bearing failures. We can also identify the supporting method for the worm shafts in the options menu. The theoretical section provides further information.