Tag Archives: compressors china

China Hot selling Air Compressor Air Filters for Diagonal Compressors Industrial Air Compressor with high quality

Product Description

           air compressor air filters for diagonal  compressors

I. Introduction:
 
Main features of oil-lubricated screw air compressor:
 
1.Imported top-grade air end, as the third generation product of state-of -the-art brand in the world, with asymmetrical 5:6 tooth rotors, is provided with outstanding performance and high efficiency far beyond other similar-type brands. 
2. Full-intellectual control system and LCD screen, with self-diagnosis and protection devices; remote control and multi-host interlock control, realizing unattended and high -tech operation. 
3.Y series three-phase asynchronous motor special for compressor, imported CZPT bearing, F-level insulation, IP54, especially suitable for long-term use, safe and reliable. 
4. Imported oil filter, oil-air separation filter cartridge to ensure oil content10000hours. 
5. Air volume auto-intelligent control, auto shutdown after long idle run to ensure over 25% of energy saving. 
6. Valve oil-free system design, achieving a safer and more reliable operation of the whole machine; main machine adopts 1 imported special compressor oil, reducing the leakage inside and outside of the compressor, improving efficiency of main machine and prolonging the service life. 
7. High efficiency, quiet, low vibration, installation without foundation required, convenient for customer maintenance, confirming to ISO9001 standard and CE. 

 

II. Technical specification
 

Model E7.5A E11A E15A E18.5A E22A E30A E37A/W E45A/W E55A/W E75A/W E90A/W E110A/W
Free air delivery/Discharge air pressure  (M3/min/ Mpa) 1.2/0.7 1.7/0.7 2.4/0.7 3.1/0.7 3.7/0.7 5.2/0.7 6.5/0.7 7.5/0.7 10.5/0.7 13.5/0.7 16.5/0.7 20.5/0.7
1.1/0.8 1.6/0.8 2.3/0.8 3/0.8 3.5/0.8 5/0.8 6.3/0.8 7.2/0.8 9.5/0.8 13/0.8 16/0.8 19/0.8
1/1.0 1.4/1.0 2.2/1.0 2.8/1.0 3.0/1.0 4.1/1.0 5.8/1.0 7.0/1.0 8.5/1.0 11/1.0 14/1.0 17.5/1.0
0.8/1.3 1.2/1.3 1.7/1.3 2.3/1.3 2.5/1.3 3.7/1.3 25.0/1.3 6.0/1.3 7.5/1.3 9.5/1.3 12/1.3 14/1.3
Air supply temperature ≤ambient temperature +8~`15ºC
Motor Power (kw/hp) 7.5/10 11/15 15/20 18.5/25 22/30 30/40 37/50 45/60 55/75 75/100 90/120 110/150
Start method Y-△Starter
Voltage (v/hz)                                              380V 3PH 50HZ     (380V-3PH-60HZ/ 460V- 3PH- 60HZ/ 220V- 3PH-60HZ/ 400V-3PH-50HZ/6000V-3PH-50HZ/other voltagesd can be customized )                                                                               
Drive method V-belt transmission / Coupling transmission
Oil content (PPM)  ≤3
Connector inch 3/4″ 3/4″ 1″ 1″ 1″ 1  1/4″ 1  1/4″ 1 1/2″ 1 1/2″ 2″ 2″ 2  1/4″
Noise(Db)±2  56 58 60 60 60 66 66 66 70 71 71 73
Dimension length mm 900 1060 1060 1080 1080 1300 1300 1300 1820 2440 2560 2760
width   mm 700 800 800 880 880 1100 1100 1100 1200 1300 1300 1340
height  mm 1040 1230 1230 1420 1420 1650 1650 1650 1600 1620 1620 1710
Weight (kg) 400 500 550 650 680 1000 1050 1100 1350 1800 2150 2900

III. CE & ISO Certificates:

Package photos:

On-site photos:

IV. Company Introduction

ZheJiang CZPT COMPRESSOR CO., LTD.  is 1 UK wholly-owned compressor company, which was situated in ZheJiang in 2004, based in technical cooperation with European air end manufacturer and British O.S.G. OSG ZheJiang specializes in manufacturing the world-class screw compressors and air purification equipments.
In order to meet customers’ expectations and requirements, OSG ZheJiang integrates the compressing system to embody the merits of reliability, energy saving, silence, convenience.  OSG ZheJiang had obtained the compressor production license (certificate No: XK06-571-0571), quality certificate and general machinery certificate, ISO 9001:2008 certificate and CE certificate.
 OSG has established a nation-wide service system of 40 offices, and provided comprehensive services, such as consulting, training, repairing, spare parts supplying, etc. OSG ZheJiang also do OEM for trading companies and agents, according to their requirements.
 OSG ZheJiang welcome customers and engineers all over the world to study, train and cooperate. Welcome to OSG ZheJiang .
 
 
V. Company Advantages
1.Enormous potentiality, long history
ZheJiang CZPT Compressor Co., Ltd. is 1 British wholly-owned enterprise. Currently in China, OSG has set up 3 major manufacturing bases (ZheJiang CZPT Compressor Co., Ltd, ZHangZhoug Ulite Tools Co.,Ltd., ZheJiang OSG welding), 5 Manufacturers. Meanwhile we cooperate with the European world-advance air end manufacturer. OSG ZheJiang possesses a complete production, sales and after-sales service system. OSG has 40 offices and more than 80 after-sales service centers, and products are sold to more than 20 countries.
 
2. Advanced configuration, world-renowned components, abundant production experience.
    The control system is the most advanced. The controller is designed and manufactured by Schneider, France. It is equipped with the large Chinese-English liquid crystal display screen. It can monitor more than 20 main operating parameters, and has the functions of fault recording, maintenance and alarm shutdown. It can achieve efficient intelligent control, unattended.
Remote control: the computer processor can directly check the user’s real-time operating system. Combine the reliability, energy saving, practicality in one. remote control can start, stop, load, unload the compressor and also other local control can be carried out. The operation, alarm and fault and relative local information can be monitored. (detailed description followed)
Remote control function:
Multiple compressors remote centralized control: reduce system pressure, reduce energy consumption, real-time monitoring.
Dual pressure setting: Two system pressure bands can be set manually or automatically to optimize energy use and reduce operating costs.
Delayed secondary shutdown: This function controls the motor to run only when needed, allowing the motor to run less and minimize the energy consumption.

The Benefits of Spline Couplings for Disc Brake Mounting Interfaces

Spline couplings are commonly used for securing disc brake mounting interfaces. Spline couplings are often used in high-performance vehicles, aeronautics, and many other applications. However, the mechanical benefits of splines are not immediately obvious. Listed below are the benefits of spline couplings. We’ll discuss what these advantages mean for you. Read on to discover how these couplings work.

Disc brake mounting interfaces are splined

There are 2 common disc brake mounting interfaces – splined and six-bolt. Splined rotors fit on splined hubs; six-bolt rotors will need an adapter to fit on six-bolt hubs. The six-bolt method is easier to maintain and may be preferred by many cyclists. If you’re thinking of installing a disc brake system, it is important to know how to choose the right splined and center lock interfaces.
splineshaft

Aerospace applications

The splines used for spline coupling in aircraft are highly complex. While some previous researches have addressed the design of splines, few publications have tackled the problem of misaligned spline coupling. Nevertheless, the accurate results we obtained were obtained using dedicated simulation tools, which are not commercially available. Nevertheless, such tools can provide a useful reference for our approach. It would be beneficial if designers could use simple tools for evaluating contact pressure peaks. Our analytical approach makes it possible to find answers to such questions.
The design of a spline coupling for aerospace applications must be accurate to minimize weight and prevent failure mechanisms. In addition to weight reduction, it is necessary to minimize fretting fatigue. The pressure distribution on the spline coupling teeth is a significant factor in determining its fretting fatigue. Therefore, we use analytical and experimental methods to examine the contact pressure distribution in the axial direction of spline couplings.
The teeth of a spline coupling can be categorized by the type of engagement they provide. This study investigates the position of resultant contact forces in the teeth of a spline coupling when applied to pitch diameter. Using FEM models, numerical results are generated for nominal and parallel offset misalignments. The axial tooth profile determines the behavior of the coupling component and its ability to resist wear. Angular misalignment is also a concern, causing misalignment.
In order to assess wear damage of a spline coupling, we must take into consideration the impact of fretting on the components. This wear is caused by relative motion between the teeth that engage them. The misalignment may be caused by vibrations, cyclical tooth deflection, or angular misalignment. The result of this analysis may help designers improve their spline coupling designs and develop improved performance.
CZPT polyimide, an abrasion-resistant polymer, is a popular choice for high-temperature spline couplings. This material reduces friction and wear, provides a low friction surface, and has a low wear rate. Furthermore, it offers up to 50 times the life of metal on metal spline connections. For these reasons, it is important to choose the right material for your spline coupling.
splineshaft

High-performance vehicles

A spline coupler is a device used to connect splined shafts. A typical spline coupler resembles a short pipe with splines on either end. There are 2 basic types of spline coupling: single and dual spline. One type attaches to a drive shaft, while the other attaches to the gearbox. While spline couplings are typically used in racing, they’re also used for performance problems.
The key challenge in spline couplings is to determine the optimal dimension of spline joints. This is difficult because no commercial codes allow the simulation of misaligned joints, which can destroy components. This article presents analytical approaches to estimating contact pressures in spline connections. The results are comparable with numerical approaches but require special codes to accurately model the coupling operation. This research highlights several important issues and aims to make the application of spline couplings in high-performance vehicles easier.
The stiffness of spline assemblies can be calculated using tooth-like structures. Such splines can be incorporated into the spline joint to produce global stiffness for torsional vibration analysis. Bearing reactions are calculated for a certain level of misalignment. This information can be used to design bearing dimensions and correct misalignment. There are 3 types of spline couplings.
Major diameter fit splines are made with tightly controlled outside diameters. This close fit provides concentricity transfer from the male to the female spline. The teeth of the male spline usually have chamfered tips and clearance with fillet radii. These splines are often manufactured from billet steel or aluminum. These materials are renowned for their strength and uniform grain created by the forging process. ANSI and DIN design manuals define classes of fit.
splineshaft

Disc brake mounting interfaces

A spline coupling for disc brake mounting interfaces is a type of hub-to-brake-disc mount. It is a highly durable coupling mechanism that reduces heat transfer from the disc to the axle hub. The mounting arrangement also isolates the axle hub from direct contact with the disc. It is also designed to minimize the amount of vehicle downtime and maintenance required to maintain proper alignment.
Disc brakes typically have substantial metal-to-metal contact with axle hub splines. The discs are held in place on the hub by intermediate inserts. This metal-to-metal contact also aids in the transfer of brake heat from the brake disc to the axle hub. Spline coupling for disc brake mounting interfaces comprises a mounting ring that is either a threaded or non-threaded spline.
During drag brake experiments, perforated friction blocks filled with various additive materials are introduced. The materials included include Cu-based powder metallurgy material, a composite material, and a Mn-Cu damping alloy. The filling material affects the braking interface’s wear behavior and friction-induced vibration characteristics. Different filling materials produce different types of wear debris and have different wear evolutions. They also differ in their surface morphology.
Disc brake couplings are usually made of 2 different types. The plain and HD versions are interchangeable. The plain version is the simplest to install, while the HD version has multiple components. The two-piece couplings are often installed at the same time, but with different mounting interfaces. You should make sure to purchase the appropriate coupling for your vehicle. These interfaces are a vital component of your vehicle and must be installed correctly for proper operation.
Disc brakes use disc-to-hub elements that help locate the forces and displace them to the rim. These elements are typically made of stainless steel, which increases the cost of manufacturing the disc brake mounting interface. Despite their benefits, however, the high braking force loads they endure are hard on the materials. Moreover, excessive heat transferred to the intermediate elements can adversely affect the fatigue life and long-term strength of the brake system.

China Hot selling Air Compressor Air Filters for Diagonal Compressors Industrial Air Compressor   with high qualityChina Hot selling Air Compressor Air Filters for Diagonal Compressors Industrial Air Compressor   with high quality

China factory Hot Selling Oilless 30HP 22kw Energy Saving Frequency Drive Screw Air Compressors Compressor with Permanent Magnet Motor wholesaler

Product Description

AirHorse Promises Every Machine Will Run Well More Than 15 Years

Features Of PMSP Inverter Screw Air Compressor

1. Air end with high-efficiency

2. Double Screw with low noise, Super Silenced Enclosure

3. Elegant compact design. Fully open access door to inner parts for easy service.

4. 100% Continuous duty operation. Load/No Load operation

5. High quality CE Certificate industrial electric motors. ISO,CE,UL Certificate

6. Easy to use and read LCD control panel

7. High temperature, high pressure and anti-rotation shutdown

8. Energy efficient operation

9. 5 micron, water-resistant air filtration material

10. 1year full machine warranty,3years air end warranty.

11. Supply the machine with different working voltage according to customer’s request,

such as: 380Volt,3phase,50hz

420Volt,3phase,50hz

380Volt,3phase,60hz

220Volt,3phase and 60hz, etc.
 

Technical Specifications of PMSM Frequency Compressor
Model Motor power Exhaust pressure Air flow Air flow Size Weight
KW Mpa m³/min CFM (L×W×H)mm Kg
EPM-10A 7.5 0.8 1.1 39  950*650*900 260
1 0.9 32 
EPM-20A 15 0.8 2.3 81  1160*700*1100 350
1 2 71 
EPM-30A 22 0.8 3.8 134  1200*900*1150 530
1 3.6 127 
EPM-40A 30 0.8 5.2 184  1400*900*1225 630
1 4.8 169 
EPM-50A 37 0.8 6.5 230  1560*1000*1365 750
1 5.7 201 
EPM-60A 45 0.8 7.5 265  1560*1000*1365 830
1 6.8 240 
EPM-75A 55 0.8 10.5 371  1800*1070*1490 1120
1 8.9 314 
EPM-100A 75 0.8 13.5 477  1800*1070*1490 1290
1 11.5 406 
EPM-120A 90 0.8 16.5 583  2100*1400*1780 1900
1 13.7 484 
EPM-150A 110 0.8 20.5 724  2500*1450*1800 2300
1 17.9 632 
EPM-175A 132 0.8 24 847  2700*1550*1800 3500
1 21.3 752 
EPM-220A 160 0.8 28.5 1006  2700*1550*1800 3800
1 25.5 900 

Product display

Air Compressor Parts

AirHorse Screw Air Compressor Main Configuration
Item Parts Brand
1 Air end GU(Germany origin)
2 Intake Valve Red star(Chian)
3 Solenoid Valve CEME (Italy)
4 Temperature sensor Red star (China)
5 Pressure sensor Huba original (from Switzerland)
6 Motor Xihu (West Lake) Dis.g Motor( China)
7 Coupling Germany KTR
8 Thermostat Valve Italy VMC
9 PLC Schneider Electric (France)
10 Minimal Pressure Valve Red star(Chian)
11 Air filter element Germany MANN
12 Oil filter element Germany MANN
13 Oil separator element Germany MANN
14 Bearing Sweden SKF

 

Why choose us

HangZhou AirHorse Compressor co., ltd is the professional manufacturing and exporter.We are a factory in HangZhou, China.We are specialized in air compressor research, development and production. The main products including screw air compressor, and air dryer etc. We do many OEM for international famous brand such as CZPT Rand.

 

We have obtained the approval of ISO9001-2000 international quality management system, ISO14001 Enviroment management system authentication, CE quality system, ASME quality system etc.

Packaging and Shipping

AirHorse compressor made each air compressor will be through various tests, only test run successful machine, will enter the next process: cleaning and packing, our packing is to adopt international standards and according to the customer’s requirements of transport equipment, in order to protect our machine can intact meet customer’s hands, transportation will be without the mode of transportation: by sea, air, train, car traffic, etc.

After-sale Service

• Guarantee time: 3 years for the air end, and 1 year for the whole machine.

• Any questions or requests before, during or after sales, we would like to help you any time and will find you the best solution in 24 hours.

• Warranty: One year for the whole machine Genuine spare parts will be provided with best price.

• Over board engineer service is available.

Overseas Engineer Service

• We are available to send our engineer for aboard service. Only need you to arrange the accommodation, transportation and translator. Extra cost for each will be discussed based on local price level.

Machinery Exhibition

Our Team

Special Customized Service

1) Full OEM
• Quantity: at least 5 pcs
• In this plan, we will do all the changes (Color, name plate and logo) as your need, and will not charge extra fee.

2) Half OEM
• Quantity: no limit
• Under this program, we can make the necessary alteration (name plate and logo) but we will charge some extra fee for the name plate, as the name plate factory has the MOQ.

3) Logo OEM
• Quantity: no limit
• Only the logo will be changed to yours, and no extra fee will be charged.

FAQ

Q1: Warranty terms of your machine?
A1: One year warranty for the machine and technical support according to your needs.

Q2: Will you provide some spare parts of the machines?
A2: Yes, of course.

Q3: What about product package?
A3: We pack our products strictly with standard seaworthy case.

Q4: Can you use our brand?
A4: Yes, OEM is available.

Q5: How long will you take to arrange production?
A5: Immediate delivery for stock products.380V 50HZ we can delivery the goods within 3-15 days. Other voltage or other color we will delivery within 25-30 days.

Q6: How Many Staff Are There In your Factory?
A6: About 100.

Q7: What’s your factory’s production capacity?
A7: About 550-650 units per month.

Q8: What the exactly address of your factory?
A8: Our company is located in AirHorse Industrial Park, Xihu (West Lake) Dis. District, HangZhou, ZheJiang , China.
 

Hello,my friend, I’m an air compressor manufacturer in China.We do many OEM for international famous brand such as CZPT Rand.

This price is the recommended market price. For specific prices and delivery dates, please click “Contact Supplier” to send us an inquiry, and tell us what power, pressure and voltage you need, and we will provide you with the best price. Thank you!

 

How to Replace the Drive Shaft

Several different functions in a vehicle are critical to its functioning, but the driveshaft is probably the part that needs to be understood the most. A damaged or damaged driveshaft can damage many other auto parts. This article will explain how this component works and some of the signs that it may need repair. This article is for the average person who wants to fix their car on their own but may not be familiar with mechanical repairs or even driveshaft mechanics. You can click the link below for more information.
air-compressor

Repair damaged driveshafts

If you own a car, you should know that the driveshaft is an integral part of the vehicle’s driveline. They ensure efficient transmission of power from the engine to the wheels and drive. However, if your driveshaft is damaged or cracked, your vehicle will not function properly. To keep your car safe and running at peak efficiency, you should have it repaired as soon as possible. Here are some simple steps to replace the drive shaft.
First, diagnose the cause of the drive shaft damage. If your car is making unusual noises, the driveshaft may be damaged. This is because worn bushings and bearings support the drive shaft. Therefore, the rotation of the drive shaft is affected. The noise will be squeaks, dings or rattles. Once the problem has been diagnosed, it is time to repair the damaged drive shaft.
Professionals can repair your driveshaft at relatively low cost. Costs vary depending on the type of drive shaft and its condition. Axle repairs can range from $300 to $1,000. Labor is usually only around $200. A simple repair can cost between $150 and $1700. You’ll save hundreds of dollars if you’re able to fix the problem yourself. You may need to spend a few more hours educating yourself about the problem before handing it over to a professional for proper diagnosis and repair.
The cost of repairing a damaged driveshaft varies by model and manufacturer. It can cost as much as $2,000 depending on parts and labor. While labor costs can vary, parts and labor are typically around $70. On average, a damaged driveshaft repair costs between $400 and $600. However, these parts can be more expensive than that. If you don’t want to spend money on unnecessarily expensive repairs, you may need to pay a little more.
air-compressor

Learn how drive shafts work

While a car engine may be 1 of the most complex components in your vehicle, the driveshaft has an equally important job. The driveshaft transmits the power of the engine to the wheels, turning the wheels and making the vehicle move. Driveshaft torque refers to the force associated with rotational motion. Drive shafts must be able to withstand extreme conditions or they may break. Driveshafts are not designed to bend, so understanding how they work is critical to the proper functioning of the vehicle.
The drive shaft includes many components. The CV connector is 1 of them. This is the last stop before the wheels spin. CV joints are also known as “doughnut” joints. The CV joint helps balance the load on the driveshaft, the final stop between the engine and the final drive assembly. Finally, the axle is a single rotating shaft that transmits power from the final drive assembly to the wheels.
Different types of drive shafts have different numbers of joints. They transmit torque from the engine to the wheels and must accommodate differences in length and angle. The drive shaft of a front-wheel drive vehicle usually includes a connecting shaft, an inner constant velocity joint and an outer fixed joint. They also have anti-lock system rings and torsional dampers to help them run smoothly. This guide will help you understand the basics of driveshafts and keep your car in good shape.
The CV joint is the heart of the driveshaft, it enables the wheels of the car to move at a constant speed. The connector also helps transmit power efficiently. You can learn more about CV joint driveshafts by looking at the top 3 driveshaft questions
The U-joint on the intermediate shaft may be worn or damaged. Small deviations in these joints can cause slight vibrations and wobble. Over time, these vibrations can wear out drivetrain components, including U-joints and differential seals. Additional wear on the center support bearing is also expected. If your driveshaft is leaking oil, the next step is to check your transmission.
The drive shaft is an important part of the car. They transmit power from the engine to the transmission. They also connect the axles and CV joints. When these components are in good condition, they transmit power to the wheels. If you find them loose or stuck, it can cause the vehicle to bounce. To ensure proper torque transfer, your car needs to stay on the road. While rough roads are normal, bumps and bumps are common.
air-compressor

Common signs of damaged driveshafts

If your vehicle vibrates heavily underneath, you may be dealing with a faulty propshaft. This issue limits your overall control of the vehicle and cannot be ignored. If you hear this noise frequently, the problem may be the cause and should be diagnosed as soon as possible. Here are some common symptoms of a damaged driveshaft. If you experience this noise while driving, you should have your vehicle inspected by a mechanic.
A clanging sound can also be 1 of the signs of a damaged driveshaft. A ding may be a sign of a faulty U-joint or center bearing. This can also be a symptom of worn center bearings. To keep your vehicle safe and functioning properly, it is best to have your driveshaft inspected by a certified mechanic. This can prevent serious damage to your car.
A worn drive shaft can cause difficulty turning, which can be a major safety issue. Fortunately, there are many ways to tell if your driveshaft needs service. The first thing you can do is check the u-joint itself. If it moves too much or too little in any direction, it probably means your driveshaft is faulty. Also, rust on the bearing cap seals may indicate a faulty drive shaft.
The next time your car rattles, it might be time for a mechanic to check it out. Whether your vehicle has a manual or automatic transmission, the driveshaft plays an important role in your vehicle’s performance. When 1 or both driveshafts fail, it can make the vehicle unsafe or impossible to drive. Therefore, you should have your car inspected by a mechanic as soon as possible to prevent further problems.
Your vehicle should also be regularly lubricated with grease and chain to prevent corrosion. This will prevent grease from escaping and causing dirt and grease to build up. Another common sign is a dirty driveshaft. Make sure your phone is free of debris and in good condition. Finally, make sure the driveshaft chain and cover are in place. In most cases, if you notice any of these common symptoms, your vehicle’s driveshaft should be replaced.
Other signs of a damaged driveshaft include uneven wheel rotation, difficulty turning the car, and increased drag when trying to turn. A worn U-joint also inhibits the ability of the steering wheel to turn, making it more difficult to turn. Another sign of a faulty driveshaft is the shuddering noise the car makes when accelerating. Vehicles with damaged driveshafts should be inspected as soon as possible to avoid costly repairs.

China factory Hot Selling Oilless 30HP 22kw Energy Saving Frequency Drive Screw Air Compressors Compressor with Permanent Magnet Motor   wholesaler China factory Hot Selling Oilless 30HP 22kw Energy Saving Frequency Drive Screw Air Compressors Compressor with Permanent Magnet Motor   wholesaler